鸥美黄色_色内内视频免费观看_新亚洲综合菊1_91久久国产青草亚洲 - 毛片在线视频

推廣 熱搜: 變壓器  電廠  發電  輸送機    煤炭  施工  電纜  風機  物資 

江蘇濱海液化天然氣(LNG)項目標準球閥(4"及以上且900磅級及以上)招標公告

   日期:2020-08-12     來源:中國電力招標采購網    作者:dlztb    瀏覽:0    
核心提示:招標公告 Invitationfor Bids (IFB) 項目Project: Jiangsu LNGTerminal Project Standard ball valves (4” and 900LB and above

招標公告

Invitationfor Bids (IFB)

項目

Project: Jiangsu LNG Terminal Project Standard ball valves (4” and 900LB and above)

招標編號:0704-2040JDCP0443/01

Bid No: 0704-2040JDCP0443/01

日    期:2020年8月12 

Date:Aug.12, 2020

 

1.中化建國際 (以下簡稱“招標機構”)受中海油江蘇天然氣 委托,邀請合格投標人就江蘇LNG接收站項目下列全新貨物和有關服務進行國際公開招標, 現邀請投標人對下列貨物和服務提交密封投標:

CNCCC International Tendering Co.,Ltd.(hereinafter called “Tendering Agent”), for and on behalf of CNOOC Jiangsu Gas Co., Ltd (hereinafter called "Purchaser" )invites sealed bids from eligible bidders for the supply of following equipment:

貨物

Name of Goods: Standard ball valves (4” and 900LB and above)

數量:22臺,其中1500磅手動球閥4"8臺,8"1臺,14"2臺,16"4臺,24"2臺,40"3臺;1500磅氣動開關球閥8"1臺,40"1臺。

Qty:22stations,of these,1500CL manual ball valves 4"8sets, 8"1set, 14"2sets, 16"4sets, 24"2 sets,40"3 sets. ;1500CL of Pneumatic On/Off Valve (Ball Valve) 8"1set,40"1 set .

交貨期:

DeliverySchedule:

關境外提供的貨物,合同簽訂后270日裝船,交貨

Goods provided inside the customs territory shall arrive at the site designated bythe owner of Jiangsu LNG terminal in Binhai port area, Yancheng City, Jiangsu Province 300 days after signing the contract.

 

2.業績和資格要求:

References and Qualification requirement:

1)資質要求:

Qualification requirement:

A.投標人必須是具有獨立法人資格的標準球閥制造商或代理商。

獨立法人資格要求:關境內投標人應提供有效的營業執照、組織機構代碼證、稅務登記證或三證合一營業執照等。關境外投標人應提供有效的獨立法人證明,以證明投標人具有獨立法人資格。

A. Bidder shall be manufacturer or authorized agent designated by manufacturer with the qualification of independent legal entity.

Independent legal personality requirement :Bidder fromwithin the PRC Customs Territory shall provide valid business license,Organization Code Certificate and tax registration certificate orinte grated business license combined above three certificates. Bidder from outsidethe PRC Customs Territory shall provide valid independent legal entitycertificate.,To prove that the bidder has independent legal personality.

 

B. 代理商要求:如果投標人所投的貨物不是投標人自己制造的,投標人應得到貨物制造商的同意以及其在本次投標中唯一提供該貨物的正式授權書,且本次投標的產品必須是同一品牌。

B. If the goods is not manufactured by bidder, the bidder shall be duly authorized by the goods' Manufacturer tosupply the goods solely in this bidding, and the products in this bidding mustbe of the same brand.

 

C. 投標人應提供閥門制造商以下三類有效認證證書復印件,若三類認證證書包含產品的類型、口徑、溫度和壓力等級其中的一種或幾種參數,則其證書中的相應參數須覆蓋本次招標的產品對應最高參數要求。所有證書認證的制造商名稱應與其所提供業績的制造商、此次投標貨物的制造商一致。

C. The bidder shall provide copies of the three type certifications ofthe manufacturer when bidding, if the three type certifications include one or several parameter of valve type, size, temperature and pressure, the corresponding parameter shall cover the corresponding valve’s highest parameter inthe bidding documents. The name of manufacture on the certificateshall be the same with the manufacture of References and the manufacture ofthe bidding Goods:

(1)壓力設備認證證書:制造商應具有中國國家質監局頒發的特種設備制造許可證(A2(2)級)、特種設備型式試驗證書或壓力設備(PED)認證證書中的至少一種,且所有證書均應在有效期內;

Pressure equipment certification:The manufacturer should have at least one certificate through the Manufacturer license of Special Equipment People’s Republic of China issued by General Administration of Quality Supervision(Certificate level for cryogenic valves:A2(2)), or Certificate for Type Test of Specific Equipment or certificate for pressure equipment(PED), and the certification should be within the period of validity.

若投標人提供壓力設備(PED)認證證書,須承諾在供貨前提供由中國國家質監局頒發的特種設備型式試驗證書,證書中閥門類型,口徑、磅級覆蓋本次招標范圍且證書認證的制造商應與此次投標貨物的制造商一致。

If the bidder privides certificate for pressure equipment(PED, it must promise to provide the type test certificate ofspecial equipment issued by the State Administration of quality supervision of the people's Republic of China before supply. The valve type, caliber and scalein the certificate shall cover the scope of this bidding,and the manufacturer certified in the certificate shall be consistent with the manufacturer of the bidding goods.

(2) 防火認證證書:制造商應具有API607或API6FA或ISO10497防火證書,認證機構應為Lloyd's、BV或DNV等;

Fire safe certification:Vendor should provide API 607 or API 6FA or ISO10497 fire test certification offered by Lloyd's, BV, DNV , etc.

(3) 低泄漏認證證書:閥門必須具備可靠的外密封性能,應至少達到TA-LUFT或ISO 15848-1的要求,并提供相關測試的TA-LUFT證書或ISO 15848 PART 1的認證。

Leakage certification:Valves shall have a reliable outside sealing performance and meet the requirements of TA-LUFT or ISO 15848-1. VENDOR shall provide TA-LUFT certification  orISO 15848 PART 1 certification of the relevant tests.

 

D. 儀表球閥安全完整性(Safety integrity):

制造商須提供閥門、執行機構如TUV或者Exida等權威機構出具不低于 SIL2等級認證證書,證書在有效期內,投標時提供有效證書復印件。

The manufacturer shall provide valves and actuators such as TUV or Exida with certifications notless than SIL2 and the certificate is within the validity period, Provide copies of valid certificates when bidding.

制造商須提供電磁閥如TUV或者Exida等權威機構出具不低于 SIL3等級認證證書,證書在有效期內,投標時提供有效證書復印件。

The manufacturer shall provide solenoid such as TUV or Exida with certifications not less than SIL3 and be within the validity period, Provide copies of valid certificates when bidding.

 

E. 防爆合格證(explosion-proof certificate issued):電磁閥、限位開關應具有由中國國家授權的監督檢驗機構頒發的防爆合格證,須在供貨前提供防爆合格證書。電磁閥、限位開關的防爆等級不低于ExdⅡBT4,防護等級不低于IP66。

E. solenoid valves, and limit switches shall have explosion-proof certificates issued by China's authorized supervision andinspection agencies. And the vendor should supply explosion proof certificate before delivery. solenoid valve and limit switch shall not less than Exd Ⅱ BT4,protection class of solenoid valve and limit switch shall not less than IP66.

 

F. 電氣設備產品認證(product certification of electrical equipment):防爆電氣產品滿足國家市場監督管理總局公告〔2019年第34號〕《市場監管總局關于防爆電氣等產品由生產許可轉為強制性產品認證管理實施要求的公告》的要求,須在供貨時提供CCC認證證書,投標時須書面承諾在供貨時提供CCC認證證書。

F. The explosion-proof electrical products meet the requirements of the announcement of the State Administration of market supervision [No. 34in 2019]  《notice ofthe State Administration for Market Regulation about explosion-proof electrical products change from production license to compulsory product certification》. And China Compulsory Certification shall be supplied when delivery. At the time of bidding .a written commitment must be made to provide the CCC certificate at the time of supply.

 

G. 從中華人民共和國關境內提供的貨物:

投標截止時間前已進口的貨物:不接受

G.For goods offered from within PRC customs territory:goods already imported prior to the deadline for submission of bids(notallowed);

 

2)財務要求:投標人應提供2017-2019年審計機構出具的財務審計報告及經審計的財務報表,包括資產負債表、現金流量表、利潤表,并列示出2017-2019三年凈資產和資產負債率。

Bidder shall submit 2017-2019 audited financial report issued by auditing agency, including balance sheets, cash flow statement, profit statement,and show the net assets and asset liability ratio in 2017-2019.

2017-2019年的年平均凈資產:不低于等值1000萬元人民幣;

Average netassets of last three years (from 2017 to 2019):not less than RMB 10,000,000Yuan or equivalent;

2017-2019年的年平均資產負債率:小于0.85。

Average asset-liability ratio of last three years (from 2017 to 2018): less than 0.85.

3)業績要求:

Performance requirements:

A. 制造商自2006年1月1日至投標截止之日,須具有至少1座中國境內LNG接收站(規模不小于200萬噸/年)頂裝球閥穩定投運業績,且上述國內業績合同中至少包含有2臺尺寸≥30寸且磅級≥900LB的頂裝球閥。

A.    manufacturers since January 1, 2006 solstice the deadline of the bid, contract signing time, must have at least one LNG receiving station in China (size is not less than 2 million tons/year) Top mounted ball valve usingperformance, and the above domestic performance contract includes at least 2 Top mounted ball valves with size ≥30 "and pound grade ≥900LB.

B. 投標人須提交有效的業績表和相關證明文件(“1.合同復印件相關章節”和“2.用戶使用證明或用戶調試報告”。如前述1和2無法體現接收站名稱和規模,須提供其它證明接收站名稱和規模的公開發行文件)。業績證明文件必須至少體現以下內容:合同簽署時間、貨物名稱及類型(頂裝球閥)、裝置名稱及規模(LNG接收站,不小于200萬噸/年)、供貨數量、閥門尺寸、磅級、閥門結構形式。未提交業績證明文件,或所提供的業績證明文件無法驗證前述業績信息,均視為無效業績。

 B.Bidders shall submit valid performanc estatements and relevant supporting documents (“1. Relevant chapters copies of contract”and“2. User's on-site commissioning report or user's certificate of use”. If  the above item 1 and 2can not prove the name and scale of  LNG receiving stations,the bidder shall provide other public document to prove thename and scale of LNG receiving stations).The relevant documentary evidence must embody at least the following contents: the signing time of the contract, the name of the goods, the type ofthe goods (Top mounted ball valve), the name and scale of the unit (LNG receiving stations no less than 2 million tons per year ), thequantity of goods supplied, the valve size,class valve,valve structure. Failure to submit are levant documentary evidence for their reference or failure to verify the above information will be regarded as invalid performance.

C.投標人所報的本次招標標準球閥的原產地和制造商應與所提供業績中的標準球閥原產地以及制造商一致,且所投本次招標標準球閥應在其原產地工廠進行生產和檢驗,不得委托加工。投標人提交能體現原產地和制造商的業績證明文件,包括1.合同復印件或2.報關單或3.原產地證明或4. BV、DNV、勞氏等國際知名第三方檢驗機構出具的報告,例如出廠檢驗報告、制造過程檢驗報告等。

C. The original place and manufacturer of  Standard ball valves of the bidder’s quotation shall be inaccordance with the original place and manufacturer of the Standard ball valves of the offered performance, and must be processed and inspected in the originalplace, OEM is forbidden.

To prove country of originand manufacturer, Bidder shall provide the reference evidence, including1.contract copies or 2. customs declaration or 3.place of origin certificate or4. certified by a third authority such as Lloyd's, BV or DNV or other internationally renowned authority, the certification include factory inspection report, manufacturing process inspection report, etc.

 

4)質量要求:制造商應提供ISO9001質量管理體系認證證書,且證書在有效期內。代理商投標時應提供所代理的產品制造商的ISO證書。

Manufacturer shall have theISO9001 quality management system certification and the certificate is valid.The agent shall have the ISO certificate of the product manufacturer.

業主保留按ITP要求直接從中國派遣第三方檢驗人員對任一重要質量控制點(如閥門主要胚件生產廠、閥門主要部件加工廠、閥門部件組裝廠、閥門測試廠等)進行見證性檢驗的權利。

The purchaser reserves the right to send third-party inspector from China to witness inspection of any important quality control point(such as valve main rough cast manufacture plant,valvemain parts manufacture plant, valve main parts assembly plant, valve testing plant and soon) according to the ITP.

3.有興趣的合格投標人可通過以下方式獲取招標文件:

2020年8月12日開始至2020年8月19日止,請登錄中國海洋石油集團 采辦業務管理與交易系統( ooc.com.cn)的招標公告頁面進行購買。首次登錄必須先進行注冊(免費),注冊成功后,方可購買招標文件。購買過程必須全程在線操作,線下形式的匯款將不予接受。標書費支付成功后,投標人可自行下載招標文件。招標文件每套售價為2000元人民幣或300美元,售后不退。如未在系統中購買招標文件,不可參加投標。另外,投標人還需要在 ( ooc.com.cn) on the page of Invitation for bid for purchasing Bidding document from Aug.12,2020 to Aug.19, 2020.For the first time of login, a registration (free of charge) is needed and only after successful registration, Bidder can purchase Bidding documents online. The whole purchasing process must be operated online and offline payment will not be accepted.After successful payment of RMB 2000.00 or USD300.00 for each copy of Bidding documents which is non-refundable, Bidder may download the Bidding documents.Bidder fails to purchase Bidding documents online is not eligible to bid. In addition, the bidder need to succeed in the China international bidding nets(

 

 

Nameof Tendering Agent:Procurement& Tendering Center of Procurement Dept.of China National OffshoreOil Corporation and CNCCC International TenderingCo.,Ltd.

詳細

Address:4thFloor,CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China

 

郵 編:100027

Code:100027

聯系

Contact person: Wang Yan

Telephone: +86-10-84527979

電子

 

未曾在中國電力招標采購網(www.dlztb.com)上注冊會員的單位應先注冊。登錄成功后根據招標公告的相說明下載招標文件!

項目 聯系人:李楊  
咨詢電話:010-51957458 
傳真:010-51957412 
手機:13683233285 
QQ:1211306049 
微信:Li13683233285 郵箱:1211306049@qq.com

備注:欲購買招標文件的潛在投標人,注冊網站并繳納因特網技術服務費后,查看項目業主,招標公告,中標公示等,并下載資格預審范圍,資質要求,招標清單,報名申請表等。為保證您能夠順利投標,具體要求及購買標書操作流程按公告詳細內容為準,以招標業主的解答為準本。

來源:中國電力招標采購網?編輯:cnooc
 
標簽: 江蘇濱海液化天然氣(LNG)項目標準球閥(4"及以上且900磅級及以上)招標公告
打賞
 
更多>同類資訊

最新資訊
最新行情
網站首頁  |  關于我們  |  聯系方式  |  使用協議  |  版權隱私  |  網站地圖  |  排名推廣  |  廣告服務  |  積分換禮  |  網站留言  |  RSS訂閱  |  違規舉報  |  京ICP備12017752號-21